CCENT & ICND1 Question:
What is the last host address for subnet 172.16.96.0 with mask 255.255.224.0?
A) 172.16.192.255
B) 172.16.159.254
C) 172.16.223.254
D) 172.16.255.254
E) 172.16.223.255
F) 172.16.127.254
Answer: F
For network 172.16.96.9 255.255.224.0:
When put in binary:
Network: 172.16.01100000.00000000
Mask: 255.255.11100000.00000000
To work out the last host address, put 1's in the host portion, except for the last bit which should be set to 0.
Network: 172.16.01100000.00000000
Mask: 255.255.11100000.00000000
Last Host: 172.16.01111111.11111110
Thus the last host address is: 172.16.127.254
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Friday 29 February 2008
Thursday 28 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
What is the maximum distance of Thin Ethernet?
A) 1 km
B) 200 meters
C) 450 meters
D) 500 meters
E) 600 meters
F) 185 meters
Select the best answer: F
The maximum distance of thin Ethernet is 185 meters
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
What is the maximum distance of Thin Ethernet?
A) 1 km
B) 200 meters
C) 450 meters
D) 500 meters
E) 600 meters
F) 185 meters
Select the best answer: F
The maximum distance of thin Ethernet is 185 meters
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Wednesday 27 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
The ___________ is the main circuit board of a computer.
A) Motherboard
B) Bus
C) CPU
D) RAM
E) ROM
F) Operating System
Select the best answer.
Answer: A
The Motherboard is the main circuit board of a computer
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
The ___________ is the main circuit board of a computer.
A) Motherboard
B) Bus
C) CPU
D) RAM
E) ROM
F) Operating System
Select the best answer.
Answer: A
The Motherboard is the main circuit board of a computer
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Tuesday 26 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
Match the blocks on left to the correct ones on the right
The correct answers are shown below
A current config === RAM
B startup config === NVRAM
C IOS === flash
D modem === aux port
E direct configuration === console port
F data traffic === interfaces
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Match the blocks on left to the correct ones on the right
The correct answers are shown below
A current config === RAM
B startup config === NVRAM
C IOS === flash
D modem === aux port
E direct configuration === console port
F data traffic === interfaces
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Monday 25 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
Which of the following are valid host addresses?
A) 172.16.1.255/27
B) 172.16.1.192/27
C) 172.16.1.222/27
D) 172.16.1.224/27
E) 172.16.1.161/27
F) 172.16.1.191/27
Select the 3 best answers.
Answer: A, C, E
To your success,David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Which of the following are valid host addresses?
A) 172.16.1.255/27
B) 172.16.1.192/27
C) 172.16.1.222/27
D) 172.16.1.224/27
E) 172.16.1.161/27
F) 172.16.1.191/27
Select the 3 best answers.
Answer: A, C, E
To your success,David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Sunday 24 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
Which of the following are examples of RFC 1918 addresses?
A) 10.0.0.0
B) 10.255.255.255
C) 172.64.0.0
D) 172.16.0.0
E) 192.168.0.0
F) 192.160.0.0
Select the best four answers.
Answer: A, B, D, E
To your success,David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Which of the following are examples of RFC 1918 addresses?
A) 10.0.0.0
B) 10.255.255.255
C) 172.64.0.0
D) 172.16.0.0
E) 192.168.0.0
F) 192.160.0.0
Select the best four answers.
Answer: A, B, D, E
To your success,David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Saturday 23 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
What source MAC address does PC1 see when PC2 pings PC1?
A) AAAA
B) BBBB
C) CCCC
D) DDDD
Answer: D
The Switch will not change the source MAC of frames sent from PC2 to PC1. Therefore PC1 will see the MAC address of PC2 as the source MAC address.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
What source MAC address does PC1 see when PC2 pings PC1?
A) AAAA
B) BBBB
C) CCCC
D) DDDD
Answer: D
The Switch will not change the source MAC of frames sent from PC2 to PC1. Therefore PC1 will see the MAC address of PC2 as the source MAC address.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Friday 22 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
Match the blocks on left to the correct ones on the right
The correct answers are shown below
A Class A === First Octet starts with 0
B Class B === First Octet starts with 10
C Class C === First Octet starts with 110
D Class D === First Octet starts with 1110
E Class E === First Octet starts with 11110
F Class F === Does not exist
IP addressing supports five different address classes: A, B, C, D, and E. Only classes A, B, and C are available for commercial use. The left-most (high-order) bits indicate the network class. provides reference information about five IP address classes.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Match the blocks on left to the correct ones on the right
The correct answers are shown below
A Class A === First Octet starts with 0
B Class B === First Octet starts with 10
C Class C === First Octet starts with 110
D Class D === First Octet starts with 1110
E Class E === First Octet starts with 11110
F Class F === Does not exist
IP addressing supports five different address classes: A, B, C, D, and E. Only classes A, B, and C are available for commercial use. The left-most (high-order) bits indicate the network class. provides reference information about five IP address classes.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Thursday 21 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
What protocol translates a host name to an IP address?
A) ARP
B) DHCP
C) DNS
D) RARP
E) FTP
F) Proxy-ARP
Answer: C
DNS is used to resolve names to IP addresses.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
What protocol translates a host name to an IP address?
A) ARP
B) DHCP
C) DNS
D) RARP
E) FTP
F) Proxy-ARP
Answer: C
DNS is used to resolve names to IP addresses.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Tuesday 19 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
Match the blocks on left to the correct ones on the right
the correct answers are shown below:
A Message === Application
B Segment === Transport
C Packet === Network
D Frame === Data Link
E Bits === Physical
F TCP === Reliable Delivery
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,
CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Match the blocks on left to the correct ones on the right
the correct answers are shown below:
A Message === Application
B Segment === Transport
C Packet === Network
D Frame === Data Link
E Bits === Physical
F TCP === Reliable Delivery
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,
CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Monday 18 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
Which hosts are on the same network as PC1?
A) 192.168.10.16/27
B) 192.168.10.20/27
C) 192.168.10.23/27
D) 192.168.10.21/27
E) 192.168.10.33/27
F) 192.168.10.40/27
Select the four best answers
Answer: A, B, C, D
network: 192.168.10.0000 0000 = 0
broadcast: 192.168.10.0001 1111 = 31
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,
CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Which hosts are on the same network as PC1?
A) 192.168.10.16/27
B) 192.168.10.20/27
C) 192.168.10.23/27
D) 192.168.10.21/27
E) 192.168.10.33/27
F) 192.168.10.40/27
Select the four best answers
Answer: A, B, C, D
network: 192.168.10.0000 0000 = 0
broadcast: 192.168.10.0001 1111 = 31
To your success,
David Bombal
CCIE #11023, CCSI, CCDP,
CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Sunday 17 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
Match the blocks on left to the correct ones on the right
The correct answers are shown below:
A 0x2101 === Run RxBoot
B 0x2102 === Normal Startup
C 0x2142 === Setup dialog
D 0x2100 === Run ROM Monitor
E confreg === Typed in ROM Monitor mode to change configuration register value
F config-register === Typed in global configuration mode to change configuration register value
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Match the blocks on left to the correct ones on the right
The correct answers are shown below:
A 0x2101 === Run RxBoot
B 0x2102 === Normal Startup
C 0x2142 === Setup dialog
D 0x2100 === Run ROM Monitor
E confreg === Typed in ROM Monitor mode to change configuration register value
F config-register === Typed in global configuration mode to change configuration register value
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Saturday 16 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
CDP will display which of the following?
A) Device name of connected device
B) IPX address of connected device
C) IP address of connected device
D) Capabilities of connected device
E) IP address of a remote device
F) Platform of a remote device
Answer: A, B, C, D
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
CDP will display which of the following?
A) Device name of connected device
B) IPX address of connected device
C) IP address of connected device
D) Capabilities of connected device
E) IP address of a remote device
F) Platform of a remote device
Answer: A, B, C, D
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Thursday 14 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
What command shows the command buffer contents?
Answer: show history
show history = While in EXEC mode, lists the last several commands entered.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
What command shows the command buffer contents?
Answer: show history
show history = While in EXEC mode, lists the last several commands entered.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Wednesday 13 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
Which Keystrokes will move the cursor to the beginning of the command line?
A) Ctrl-A
B) Ctrl-B
C) Ctrl-C
D) Ctrl-E
E) Ctrl-F
F) Esc-B
Answer: A
Ctrl-A = Moves the cursor to the beginning of the line.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Which Keystrokes will move the cursor to the beginning of the command line?
A) Ctrl-A
B) Ctrl-B
C) Ctrl-C
D) Ctrl-E
E) Ctrl-F
F) Esc-B
Answer: A
Ctrl-A = Moves the cursor to the beginning of the line.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Monday 11 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
The TCP 3 handshake happens in which of the following ways?
A) SYN, ACK -> ACK -> SYN
B) SYN -> SYN, ACK -> ACK
C) SYN ACK -> ACK -> SYN
D) SYN -> ACK -> SYN, ACK
Answer: B
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
The TCP 3 handshake happens in which of the following ways?
A) SYN, ACK -> ACK -> SYN
B) SYN -> SYN, ACK -> ACK
C) SYN ACK -> ACK -> SYN
D) SYN -> ACK -> SYN, ACK
Answer: B
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
Which protocol is use in the diagram?
A) IP
B) ARP
C) RARP
D) DHCP
E) ICMP
F) TCP
Answer: B
RFC 826 - Ethernet Address Resolution Protocol: Or converting network protocol addresses to 48.bit Ethernet address for transmission on Ethernet hardware
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Which protocol is use in the diagram?
A) IP
B) ARP
C) RARP
D) DHCP
E) ICMP
F) TCP
Answer: B
RFC 826 - Ethernet Address Resolution Protocol: Or converting network protocol addresses to 48.bit Ethernet address for transmission on Ethernet hardware
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Saturday 9 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day
CCENT & ICND1 Question:
Whic layers does the TCP/IP Model use?
A) Application Layer
B) Transport Layer
C) Internet Layer
D) Network Access Layer
E) Network Layer
F) Physical Layer
Select the four best answers
Answer: A, B, C, D
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Whic layers does the TCP/IP Model use?
A) Application Layer
B) Transport Layer
C) Internet Layer
D) Network Access Layer
E) Network Layer
F) Physical Layer
Select the four best answers
Answer: A, B, C, D
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Friday 8 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day - 8 February
CCENT & ICND1 Question:
A router has a default configuration. (True or False)
A) True
B) False
C) Depends
Answer: B
A router does not have a default configuration, but a switch does.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
A router has a default configuration. (True or False)
A) True
B) False
C) Depends
Answer: B
A router does not have a default configuration, but a switch does.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Thursday 7 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day - 7 February
CCENT & ICND1 Question:
What command sets a router's secret password to "password"?
Answer:
enable secret password
enable secret
To specify an additional layer of security over the enable password command, use the enable secret password comman in global configuration mode. To turn off the enable secret function, use the no form of this command.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
What command sets a router's secret password to "password"?
Answer:
enable secret password
enable secret
To specify an additional layer of security over the enable password command, use the enable secret password comman in global configuration mode. To turn off the enable secret function, use the no form of this command.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Wednesday 6 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day - 6 February
CCENT & ICND1 Question:
Match the blocks on left to the correct ones on the right
Answer:
A Curremt Configuration === show running-config
B Saved Configuration === show startup-config
C Configuration Register === show version
D IOS file === show flash
E Time information === show clock
F Routing protocols running === show ip protocols
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Match the blocks on left to the correct ones on the right
Answer:
A Curremt Configuration === show running-config
B Saved Configuration === show startup-config
C Configuration Register === show version
D IOS file === show flash
E Time information === show clock
F Routing protocols running === show ip protocols
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Monday 4 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day - 5 February 2008
CCENT & ICND1 Question:
What command will display the output in the Diagram?
A) show flash
B) show version
C) show running-config
D) show debugging
E) show startup-config
F) show IOS
Answer: A
Router #show flash
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
What command will display the output in the Diagram?
A) show flash
B) show version
C) show running-config
D) show debugging
E) show startup-config
F) show IOS
Answer: A
Router #show flash
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Sunday 3 February 2008
ConfigureTerminal.com Free CCENT / ICND1 Question of the day - 4 February 2008
CCENT & ICND1 Question:
What command will display the output in the Diagram?
A) show startup-config
B) show running-config
C) show version
D) show ip route
E) show interface
F) write
Answer: B
Router #show running-config
Building configuration...
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
What command will display the output in the Diagram?
A) show startup-config
B) show running-config
C) show version
D) show ip route
E) show interface
F) write
Answer: B
Router #show running-config
Building configuration...
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
ConfigureTerminal.com Free CCENT / ICND1 Question of the day - 3 February 2008
CCENT & ICND1 Question:
At what layer of the OSI model does a router operate?
a) Session
b) Data Link
c) Network
d) Transport
e) Application
f) Physical
Answer C:
A Router operates at layer 3 of the OSI model or the network layer.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
At what layer of the OSI model does a router operate?
a) Session
b) Data Link
c) Network
d) Transport
e) Application
f) Physical
Answer C:
A Router operates at layer 3 of the OSI model or the network layer.
To your success,
David Bombal
CCIE #11023, CCSI, CCDP, CCIP, CCNP, CCSP, CCVP
http://www.configureterminal.com/
http://www.icnd1.com/
http://www.icnd2.com/
http://www.ipcoach.com/
Subscribe to:
Posts (Atom)